Skip to content Skip to navigation

Nikon Spinning Disk Confocal Microscope

RESERVE THIS MICROSCOPE


The microscope is configured for simultaneous, two channel fast imaging with added capabilities for ROI photo-activation, FRAP, FRET and TIRF. This imaging system is specialized for fast imaging of live cells.

 

System specifications:

 

  • Nikon TiE inverted microscope with Perfect Focus (PFS) mechanism
  • Motorized XY Stage, allowing large images and multi-point time-lapse imaging
  • Yokogawa CSU-X1 (1,800 rpm, 360 fps)/Borealis Upgrade/405/488/561/642 multichroic
  • fast piezo Z stage (100 um travel, 15 ms step response)
  • Mosaic digital illumination/bleaching/activation system (450 mW 405nm laser)
  • Nikon motorized TIRF illuminator
  • InVivo Scientific enclosure w/ environmental control (temperature and CO2)
  • Possibility to image 2 colors simultaneously with up to 56 frames/sec with 512 x 512 pixels and no binning

 

Software:

 

  • NIS-Elements
  • Metamorph

 

NIS-Elements free viewer download page here:

http://www.nis-elements.com/resources-downloads.html

 

Objectives :

 

Name

Magnification

NA

Immersion

working distance

PLAN APO

20x

0.75

air

1.00 mm

PLAN APO

40x

1.15

water

0.61 mm

PLAN APO IR

60x

1.27

water

0.17 mm

PLAN APO

60x

1.40

oil

0.13 mm

PLAN APO-TIRF

100x

1.49

oil

0.12 mm

 

Confocal lasers:

 

  • 405nm (100 mW)
  • 488nm (50 mW)
  • 561nm (50 mW)
  • 642nm (100 mW)

 

Widefield illuminator:

 

  • Sutter Lambda XL

 

Detection:

 

  • two Andor iXon Ultra-897 EM-CCD cameras (allow for simultaneous fast 2 colors imaging with the SDC)
  • Andor Neo sCMOS camera

 

Funding:

 

This microscope was funded by jointly by the SOE and the Beckman Center (Dr. Alex Dunn and Jon Mulholland, PIs). Installation date: 09/2012

 

What to put in Material and Methods section (example for SDC):

 

Cells were cultivated in tissue culture dish with No. 1.5 cover glass bottom (FluoroDish) and mounted in an environmental chamber (in vivo scientific) for acquisition at 37°C and 5% CO2. DMEM media with 25mM Hepes (pH 7.2) and without phenol red was used during image acquisition, with a layer of mineral oil on top of the media to prevent evaporation. All image were collected with a Yokogawa spinning disk confocal on a Nikon Eclipse-TI inverted microscope (Nikon) equipped with a PLAN APO-TIRF 100X 1.49 N.A. oil immersion objective and the Perfect Focus System for continuous maintenance of focus. XX-EGFP fluorescence was excited with the 488nm line from a 50mW Cobolt Blues laser and collected with a quadruple band pass dichroic mirror (Semrock) and a 525/30 emission filter (Semrock).  Images were acquired with an Andor iXon Ultra 897 EMCCD camera controlled with NiS-Elements software.  For timelapse experiments, images were collected every 1 min, using an exposure time of 500 ms and 2x2 binning, with illumination light shuttered between acquisitions.  At each time point, 6 z-series optical sections were collected with a step size of 0.5 microns, using a piezo Z-axis stage (Mad City Labs).  ZGamma, brightness, and contrast were adjusted on displayed images (identically for compared image sets) using NIS-Elements software. 

LOCATION