Frontiers of Biomedical Engineering with W. Mark Saltzman
-
1
1. What Is Biomedical Engineering?
by YaleCourses 150,732 views
Frontiers of Biomedical Engineering (BENG 100)
Professor Saltzman introduces the concepts and applications of biomedical engineering, providing an overview of the course syllabus, reading materials for lecture and labs and grading logistics. Various pictures are shown to highlight the current application of biomedical engineering technologies in daily life (eg. chest x-ray, PET scan, operating room, gene chip, transport). Next, living standards and medical technologies of the past and present are compared to point out the impact of biomedical engineering as well as areas for improvement in the field. Finally, Professor Saltzman draws references from the poem "London Bridge" to illustrate some societal issues in making materials and devices in biomedical engineering.
00:00 - Chapter 1. Introduction
02:36 - Chapter 2. Biomedical Engineering in Everyday Life
18:43 - Chapter 3. A Brief History of Engineering
22:58 - Chapter 4. Biomedical Engineering in Disease Control
31:09 - Chapter 5. Course Overview and Logistics
39:23 - Chapter 6. Conclusion
Complete course materials are available at the Open Yale Courses website: http://open.yale.edu/courses
This course was recorded in Spring 2008. -
2
2. What Is Biomedical Engineering? (cont.)
by YaleCourses 25,347 views
Frontiers of Biomedical Engineering (BENG 100)
Class begins with discussion of students' answers to the two questions given as assignment in the previous lecture. Professor Saltzman talks about the basic concept of biomedical engineering and two separate aspects of it: gaining better understanding of human physiology and developing ways to improve human health. He then introduces the term homeostasis, and talks about parameters that are involved in controlling this state. Finally, the structure of the phospholipid is discussed and how it constitutes the cell membrane.
00:00 - Chapter 1. Biomedical Engineering Today
08:00 - Chapter 2. Future of Biomedical Engineering
17:21 - Chapter 3. "That's Biomedical Engineering?!"
29:09 - Chapter 4. Basic Concepts in Physiology
38:26 - Chapter 5. Lipids and Conclusion
Complete course materials are available at the Open Yale Courses website: http://open.yale.edu/courses
This course was recorded in Spring 2008. -
3
3. Genetic Engineering
by YaleCourses 35,635 views
Frontiers of Biomedical Engineering (BENG 100)
Professor Saltzman introduces the elements of molecular structure of DNA such as backbone, base composition, base pairing, and directionality of nucleic acids. He describes the processes of DNA synthesis, transcription, RNA splicing, translation, and post-translational processing required to make a protein such as insulin from its genetic code (DNA). Professor Saltzman describes the genetic code. RNA interference is also discussed as a way to control gene expression, which can be applied as a new way to treat diseases.
00:00 - Chapter 1. Introduction
01:35 - Chapter 2. Building Blocks of DNA
11:17 - Chapter 3. Structure of DNA and RNA
24:16 - Chapter 4. Central Dogma and DNA Synthesis
35:15 - Chapter 5. Genetic Code and Protein Synthesis
41:55 - Chapter 6. Control of Gene Expression
Complete course materials are available at the Open Yale Courses website: http://open.yale.edu/courses
This course was recorded in Spring 2008. -
4
4. Genetic Engineering (cont.)
by YaleCourses 19,233 views
Frontiers of Biomedical Engineering (BENG 100)
Professor Saltzman continues his presentation on DNA technology by discussing control of gene expression using two methods of RNA silencing: anti-sense therapy and RNA interference. Molecular cloning techniques to mass-produce proteins using plasmid, restriction enzymes, ligase, and antibiotic selection in bacteria are discussed. Steps and molecules involved in polymerase chain reaction are also described. Professor Saltzman explains how to detect mutations in genomic DNA, such as in sickle cell anemia patients, by gel electrophoresis and Southern blotting. Finally, he gives an example of inducing and controlling insulin expression in large animals by cloning into their genome the insulin gene with the lac promoter.
00:00 - Chapter 1. Introduction
01:29 - Chapter 2. Mechanisms of Limiting Gene Expression
11:30 - Chapter 3. Plasmids
21:35 - Chapter 4. Restriction Enzymes
33:34 - Chapter 5. Polymerase Chain Reaction
38:28 - Chapter 6. Applications of PCR
Complete course materials are available at the Open Yale Courses website: http://open.yale.edu/courses
This course was recorded in Spring 2008. -
5
5. Cell Culture Engineering
by YaleCourses 18,301 views
Frontiers of Biomedical Engineering (BENG 100)
Professor Saltzman reviews the concept of gene therapy, and gives some examples of where this is applied. Methods to help deliver DNA into cells using viruses and cationic lipids are discussed, as a way to overcome some challenges in gene therapy. Next, Professor Saltzman gives a brief introduction into bacterial and mammalian cell physiology. He describes the different tissues in the body, the cell development/differentiation process, the anchorage dependence of mammalian cells that allows them to form an organism, and the extracellular matrix.
00:00 - Chapter 1. Applications of Gene Transfer
06:40 - Chapter 2. Gene Therapy
14:45 - Chapter 3. Potentials and Limits of Hijacking Viruses
22:28 - Chapter 4. Bacterial and Human Cell Physiology
33:43 - Chapter 5. Cellular Division
38:42 - Chapter 6. Cell Differentiation
Complete course materials are available at the Open Yale Courses website: http://open.yale.edu/courses
This course was recorded in Spring 2008. -
6
6. Cell Culture Engineering (cont.)
by YaleCourses 9,133 views
Frontiers of Biomedical Engineering (BENG 100)
Professor Saltzman describes the processes of fertilization and embryogenesis. Professor Saltzman then talks about the definition and classification of different types of stem cells, where stem cells are found in the body, and the potential for use of stem cells in treating diseases. Some challenges in this type of therapy are also discussed. Finally, Professor Saltzman introduces the exponential equation for cell growth, dX/dt = eμt, and the concept of cell "doubling time."
00:00 - Chapter 1. Fertilization and Early Development
11:50 - Chapter 2. Development of Stem Cells
23:26 - Chapter 3. Results of Differentiation
36:52 - Chapter 4. Stem Cell Lineage
44:26 - Chapter 5. Cell Proliferation
Complete course materials are available at the Open Yale Courses website: http://open.yale.edu/courses
This course was recorded in Spring 2008. -
7
7. Cell Communication and Immunology
by YaleCourses 30,054 views
Frontiers of Biomedical Engineering (BENG 100)
Professor Saltzman talks about cell communication, specifically ligand-receptor interactions that are important in maintaining homeostasis in the body. Different types of receptors and ligands, the nature of their interactions and ways to apply this into developing drugs are discussed (eg. Aldopa, Taximofen, beta-blockers). Next, Professor Saltzman talks about kinases, phosphatases, cyclic AMP and the mechanism of switching protein states. Three categories of cell communication signals are introduced: autocrine, paracrine, and endocrine. Finally, an example of cell communication using regulation/response to blood sugar level is presented.
00:00 - Chapter 1. Overview of Cell Communication
07:39 - Chapter 2. Mechanisms of Cell Communication
16:27 - Chapter 3. Agonists and Antagonists
21:31 - Chapter 4. Receptors
28:02 - Chapter 5. Protein Signal Transduction
34:54 - Chapter 6. Autocrines, Paracrines, Endocrines
Complete course materials are available at the Open Yale Courses website: http://open.yale.edu/courses
This course was recorded in Spring 2008. -
8
8. Cell Communication and Immunology (cont.)
by YaleCourses 15,547 views
Frontiers of Biomedical Engineering (BENG 100)
Professor Saltzman continues his discussion of cell communication in the body, extending the description to the nervous and immune system. Professor Saltzman describes the mode of signal transmission in neurons: action potential in the axon, and neurotransmitter release at the synaptic cleft. He also introduces elements of the innate and adaptive immune system. The adaptive immune system is presented as a host/foreign antigen recognition system involving immune cells (T, B, and macrophages), antibodies, and the major histocompatibility complex 1 and 2. Immune response by cytotoxic T cells, T helper cells, and B cells to antigen recognition are discussed in detail.
00:00 - Chapter 1. Overview of the Nervous System
05:28 - Chapter 2. Cell Communication in the Nervous System
22:18 - Chapter 3. Overview of the Immune System
28:26 - Chapter 4. Immune System Responses against Foreign Hosts
40:24 - Chapter 5. Cytotoxic T-Cells and Antibodies
Complete course materials are available at the Open Yale Courses website: http://open.yale.edu/courses
This course was recorded in Spring 2008. -
9
9. Biomolecular Engineering: Engineering of Immunity
by YaleCourses 6,715 views
Frontiers of Biomedical Engineering (BENG 100)
Professor Saltzman talks about the importance of vaccines, and particularly the role of bioengineering in vaccine development. He first addresses the question of "what is a vaccine" and the role of the immune system. He then describes the biological basis, symptoms, and history of smallpox as a devastating disease worldwide, and how--starting with the work of Edward Jenner--an effective vaccine was systematically developed from cow lesions. Next, methods to deliver vaccine to a wide population are introduced. Finally, Professor Saltzman touches on the possible reemergence of smallpox as weapon for bioterrorism.
00:00 - Chapter 1. Introduction
04:42 - Chapter 2. Vaccine
13:56 - Chapter 3. Smallpox and History of Early Vaccine Development
29:05 - Chapter 4. History of Modern Smallpox Vaccinations
41:27 - Chapter 5. Threat of Bioterrorism and Conclusion
Complete course materials are available at the Open Yale Courses website: http://open.yale.edu/courses
This course was recorded in Spring 2008. -
10
10. Biomolecular Engineering: Engineering of Immunity (cont.)
by YaleCourses 6,048 views
Frontiers of Biomedical Engineering (BENG 100)
Professor Saltzman continues his presentation on the topic of vaccine. First, Professor Saltzman describes the host immune response to pathogen recognition, in terms of immunoglobulin release, T-cell activation, and memory cell production. The production, distribution, and challenges involved in making of the Salk polio vaccine and the modern, oral polio vaccine are discussed. Professor Saltzman then talks about the range of bioengineering approaches that can be used to produce vaccine: attenuated, subunit, and DNA-based. Finally, a life-intervention cost analysis (cost of technology per human life saved) for vaccine was compared to other policies to further emphasize the impact of vaccine on improving public health worldwide.
00:00 - Chapter 1. Mechanism of Vaccination
10:40 - Chapter 2. Boosters and Antibodies
18:54 - Chapter 3. History of the Polio Vaccine
35:01 - Chapter 4. Molecular, Clinical, and Economic Limitations of Vaccination
Complete course materials are available at the Open Yale Courses website: http://open.yale.edu/courses
This course was recorded in Spring 2008. -
11
11. Biomolecular Engineering: General Concepts
by YaleCourses 11,064 views
Frontiers of Biomedical Engineering (BENG 100)
Professor Saltzman starts the lecture with an introduction to pharmacokinetics and pharmacodynamics. Professor Saltzman talks about the concept of dose-response. He introduces different routes of drug administration and how they affect drug distribution and bioavailability (i.e., intravenous, oral, and sublingual routes). First-pass drug metabolism by the liver is also identified as an important source of drug degradation. Finally, modeling the body as a well-stirred vessel, Professor Saltzman explains the first-order rate equation: C = (M0/V)*e-kt, that can be used calculate the amount of drug in the body (M) as a function of time (t) and a rate constant (k); and the equation for drug half-life: t = ln(2/k).
00:00 - Chapter 1. Introduction to Drug Delivery
07:13 - Chapter 2. Relationships Between Drug Dosage and Biological Response
12:21 - Chapter 3. Injections for Drug Delivery
28:47 - Chapter 4. Oral Drug Delivery
41:25 - Chapter 5. Drug Bioavailability
Complete course materials are available at the Open Yale Courses website: http://open.yale.edu/courses
This course was recorded in Spring 2008. -
12
12. Biomolecular Engineering: General Concepts (cont.)
by YaleCourses 5,090 views
Frontiers of Biomedical Engineering (BENG 100)
Professor Saltzman reviews the pharmacokinetic first-order rate equation that can be used to model changes in drug concentration in the blood, as well as its derivation from the law of conservation of mass. The importance of maintaining a drug concentration that is sufficient for therapeutic purpose, but below a toxic level, is emphasized. Since this is directly affected by drug administration method, ways to localize and sustain therapeutic concentrations of drug, such as incorporating in slow-releasing, biocompatible polymers are introduced. Professor Saltzman gave some examples of clinical applications of controlled release drug delivery system, such as anti-restenosis drug incorporated into stents, and chemotherapeutic drugs in brain implants and microspheres.
00:00 - Chapter 1. Model for Injected Drug Delivery
08:42 - Chapter 2. Model for Oral Drug Delivery
16:10 - Chapter 3. Drug as Implant: Potentials and Limits
38:46 - Chapter 4. Accessibility of New Drug Delivery Methods
Complete course materials are available at the Open Yale Courses website: http://open.yale.edu/courses
This course was recorded in Spring 2008. -
13
13. Cardiovascular Physiology
by YaleCourses 75,240 views
Frontiers of Biomedical Engineering (BENG 100)
Professor Saltzman discusses the biophysics of the circulatory system. He begins by describing the anatomy of different types of blood vessels, and states the relationship between pressure difference (ΔP) as the driving force for fluid flow (Q) in a tube (i.e., blood vessel) with some resistance R (ΔP = RQ). R can be calculated using if dimensions of the tube (L, r) and fluid viscosity (μ) are known: R = 8μL/πr4. Next, Professor Saltzman traces the blood flow through the circulatory system and explains how the body can regulate blood flow to specific regions of the body. Finally, he describes the heart and its function as the pressure generator in the system.
00:00 - Chapter 1. Introduction
03:46 - Chapter 2. The Heart in the Circulatory System
15:42 - Chapter 3. Blood Flow and Pressure
45:03 - Chapter 4. Blood Flow Within the Closed Circulatory System
Complete course materials are available at the Open Yale Courses website: http://open.yale.edu/courses
This course was recorded in Spring 2008. -
14
14. Cardiovascular Physiology (cont.)
by YaleCourses 25,366 views
Frontiers of Biomedical Engineering (BENG 100)
Professor Saltzman describes the blood flow through the systemic and pulmonary circulatory system. More specifically, he describes, with the help of diagrams, the events that lead to blood flow in the body as a function of contraction/relaxation by specific chambers of the heart, and the effect of four valves which help direct flow. Important terms and concepts such as systole/diastole pressures, cardiac output (CO) as a function of heart rate (HR) and ejection volume (EV), and the action potential propagation that stimulates heart muscle contraction are discussed.
00:00 - Chapter 1. Review of Heart Anatomy and Physiology
04:13 - Chapter 2. Valves and the Generation of Pressure
15:26 - Chapter 3. The Cardiac Cycle
36:57 - Chapter 4. The Cardiac Conduction System and Conclusion
Complete course materials are available at the Open Yale Courses website: http://open.yale.edu/courses
This course was recorded in Spring 2008. -
15
15. Cardiovascular Physiology (cont.)
by YaleCourses 32,006 views
Frontiers of Biomedical Engineering (BENG 100)
Professor Saltzman talks about electrical conductivity in the heart: that is, the generation and propagation of electrical potential in heart cells. He describes the role of ion channels and pumps in transporting sodium, potassium, and calcium ions to create action potential. This propagation of signal from the sinoatrial node through different tissues, which can be replaced by a pacemaker, eventually stimulates contraction of muscle fibers throughout the heart. Next, he describes the electrocardiograph and how each wave trace corresponds to the events caused by depolarization/repolarization of different heart tissues.
00:00 - Chapter 1. The Lipid Membrane and Electric Potential
08:02 - Chapter 2. Creation of Action Potential
15:50 - Chapter 3. Electrophysiological Differences Between Nervous System and Heart
22:43 - Chapter 4. The Cardiac Conduction System
26:46 - Chapter 5. The Heartbeat and EKG
40:35 - Chapter 6. Conclusion
Complete course materials are available at the Open Yale Courses website: http://open.yale.edu/courses
This course was recorded in Spring 2008. -
16
16. Renal Physiology
by YaleCourses 68,146 views
Frontiers of Biomedical Engineering (BENG 100)
Professor Saltzman introduces the basic concepts of renal physiology. Professor Saltzman first introduces the function and anatomy of the kidney. Special attention is given to the cell types and structural aspect of the nephron, the functional unit of the kidney. Filtration, secretion of toxic waste, and reabsorption of water, ions, and nutrients through the glomerulus and various segments of the nephrons is discussed in detail. Finally, Professor Saltzman describes glomerular filtration rate as a function of pressure drop, which is regulated by afferent and efferent arterioles, to control how much volume being filtered through glomerulus.
00:00 - Chapter 1. Introduction to Renal Physiology
04:53 - Chapter 2. Structure and Function of Kidneys
15:52 - Chapter 3. Mechanisms of Renal Functions
29:32 - Chapter 4. Process of Renal Filtration
47:11 - Chapter 5. The Role of Pressure in Filtration and Conclusion
Complete course materials are available at the Open Yale Courses website: http://open.yale.edu/courses
This course was recorded in Spring 2008. -
17
17. Renal Physiology (cont.)
by YaleCourses 23,232 views
Frontiers of Biomedical Engineering (BENG 100)
Professor Saltzman continues his description of nephron anatomy, and the specific role of each part of the nephron in establishing concentration gradients to help in secretion and reabsorption of water, ions, nutrients and wastes. A number of molecular transport processes that produces urine from the initial ultra-filtrate, such as passive diffusion by concentration difference, osmosis, and active transport with sodium-potassium ATPase, are listed. Next, Professor Saltzman describes a method to measure glomerular filtration rate (GFR) using tracer molecule, inulin. He then talks about regulation of sodium, an important ion for cell signaling in the body, as an example to demonstrate the different ways in which nephrons maintain homeostasis.
00:00 - Chapter 1. Introduction
03:06 - Chapter 2. The Role of the Nephron in Ion Balance
16:54 - Chapter 3. The Glomerular Filtration Rate
26:21 - Chapter 4. Selective Reabsorption
39:51 - Chapter 5. Water Balance and Conclusion
Complete course materials are available at the Open Yale Courses website: http://open.yale.edu/courses
This course was recorded in Spring 2008. -
18
18. Biomechanics and Orthopedics
by YaleCourses 13,711 views
Frontiers of Biomedical Engineering (BENG 100)
Professor Saltzman introduces the material properties of elasticity and viscosity. He describes two separate experimental setups to measure the elasticity and the viscosity of a material. Material elasticity can be defined in terms of stress-strain property, and defines the Young's modulus (E), which is the slope of the stress-strain curve. Fluid viscosity, on the other hand, is described by shear stress. When modeling any material, the spring can be used to represent an ideal elastic material and the dashpot an ideal viscoelastic material. All biomaterials contain some combination of these properties and can be described by physical models that consist of both spring and dashpot.
00:00 - Chapter 1. Introduction
03:16 - Chapter 2. An Experiment on Elasticity
18:20 - Chapter 3. Viscosity
28:46 - Chapter 4. Deformation and Viscoelasticity
42:13 - Chapter 5. Conclusion
Complete course materials are available at the Open Yale Courses website: http://open.yale.edu/courses
This course was recorded in Spring 2008. -
19
19. Biomechanics and Orthopedics (cont.)
by YaleCourses 7,735 views
Frontiers of Biomedical Engineering (BENG 100)
Professor Saltzman begins the lecture with discussion of the importance of motion for the survival and propagation of any living species. He presents the different modes of motion, taking first the example flight to talk about force balance, such as the magnitude of propulsive force that must be generated overcome drag to produce forward motion. Next, the mechanics of walking, running, cycling and swimming is discussed, with emphasis on efficient use of energy, overcoming drag and friction, and the influence of organism shape and size. An equation to calculate drag force of a spherical object of radius, r, moving at velocity, v, in a medium with viscosity, μ, is introduced: Fd = 6πvμr. Finally, Professor Saltzman talks about design of the artificial hip, which biomedical engineers must take into consideration the biomechanics and natural function of the pelvic bone.
00:00 - Chapter 1. Introduction to Locomotion
09:10 - Chapter 2. The Mechanics of Flight
18:28 - Chapter 3. The Physics of Walking
26:53 - Chapter 4. Efficiencies of Walking, Running, Cycling
37:56 - Chapter 5. Mechanics and Efficiency of Swimming
45:04 - Chapter 6. Design in Biomechanics and Conclusion
Complete course materials are available at the Open Yale Courses website: http://open.yale.edu/courses
This course was recorded in Spring 2008. -
20
20. Bioimaging
by YaleCourses 6,857 views
Frontiers of Biomedical Engineering (BENG 100)
Professor Saltzman first reviews the electromagnetic spectrum, the different regimes of the spectrum, their respective wavelengths, energies, and ways of detecting them. He then talks about the use of high energy radio waves for imaging of the body. The history, components, advantages and limitations of X-ray imaging are presented in detail. Next, he introduces Computed Tomography, a related imaging technique which uses mathematical computation to compile line-scanned X-rays into a three dimensional image. Finally, Professor Saltzman touches on harmful effects of X-ray radiation, and ways to limit or avoid overexposure in these imaging techniques.
00:00 - Chapter 1. Introduction to Biomedical Imaging
05:26 - Chapter 2. The Electromagnetic Spectrum
13:29 - Chapter 3. X-Rays
24:39 - Chapter 4. Challenges of X-Ray Imaging
30:41 - Chapter 5. CT Imagery
37:02 - Chapter 6. Conclusion
Complete course materials are available at the Open Yale Courses website: http://open.yale.edu/courses
This course was recorded in Spring 2008. -
21
21. Bioimaging (cont.)
by YaleCourses 5,051 views
Frontiers of Biomedical Engineering (BENG 100)
Professor Saltzman continues his discussion of biomedical imaging technology. Magnetic resonance imaging (MRI) is introduced as an alternate form of imaging, which does not use ionizing radiation yet can provide detailed structure of the body. Functional MRI (fMRI) has a different application from traditional MRI. It can be used to measure oxygen consumption (tissue metabolic rate), and is an important tool in deciphering brain function. Third, ultrasound imaging is another imaging technique that can detect motion by translating sound wave reflections into structural images at fast timescale. Finally, examples of nuclear imaging and advances in light microscopy are discussed.
00:00 - Chapter 1. Introduction
05:04 - Chapter 2. Magnetic Resonance Imaging
25:12 - Chapter 3. fMRI
31:32 - Chapter 4. Ultrasound Imaging
44:23 - Chapter 5. Nuclear Medicine
49:56 - Chapter 6. Optical Imaging and Conclusion
Complete course materials are available at the Open Yale Courses website: http://open.yale.edu/courses
This course was recorded in Spring 2008. -
22
22. Tissue Engineering
by YaleCourses 10,871 views
Frontiers of Biomedical Engineering (BENG 100)
Professor Saltzman motivates the need for tissue engineering, and describes the basic elements of the tissue engineering approach. Professor Saltzman defines three different types of tissue transplants: autografts, allografts, and xenografts. An online resource for organ donors/recipients is presented, which stresses the great need for donors, and the important contribution of tissue engineering in producing/growing organs that can be used for this purpose. Next, Professor Saltzman compared drug and gene therapy, and discusses the use of stem cell in tissue engineering for wound healing. The need for compatible biomaterials to support growth and differentiation of stem cells into functional organ is also highlighted.
00:00 - Chapter 1. Introduction to Tissue Engineering
06:15 - Chapter 2. Challenges in Organ Transplantation
17:37 - Chapter 3. Cell Culturing in Tissue Engineering
32:34 - Chapter 4. Tissue Engineering in the Regulation of Healing Processes
Complete course materials are available at the Open Yale Courses website: http://open.yale.edu/courses
This course was recorded in Spring 2008. -
23
23. Tissue Engineering (cont.)
by YaleCourses 5,364 views
Frontiers of Biomedical Engineering (BENG 100)
In this lecture, Professor Saltzman continues his discussion of tissue engineering, and its role in facilitating healing, tissue regeneration, organ replacement, drug delivery and as model for studying human physiology. Specific examples from current research by scientists at Yale are used to illustrate some of these points and to highlight the current progress in the field. Some examples are generating neo-tissues from hydrogel scaffold seeded with cells, healing spinal cords and controlling mechanical properties of newly grown blood vessels with external conditions.
00:00 - Chapter 1. Introduction
02:28 - Chapter 2. Tissue Engineering for Replacement of Diseased Tissues
13:30 - Chapter 3. Synthetic Materials in Tissue Engineering
23:13 - Chapter 4. In Vitro Cultivation of Replacement Blood Vessels
32:19 - Chapter 5. Tissue Engineering in Control of Drug Delivery
39:54 - Chapter 6. Summary and Conclusion
Complete course materials are available at the Open Yale Courses website: http://open.yale.edu/courses
This course was recorded in Spring 2008. -
24
24. Biomedical Engineers and Cancer
by YaleCourses 5,761 views
Frontiers of Biomedical Engineering (BENG 100)
Professor Saltzman uses cancer diagnosis and treatment as an example to demonstrate the some applications of biomedical engineering technologies and methods. Some issues involved in cancer treatment, such as tumor angiogenesis, radiation sensitivity, drug localization, and cancer stem cells are mentioned. Next, he describes the phases (I-IV), in compliance to guidelines enforced by the Food and Drug Administration (FDA), which a new drug compound must go through to gain approval prior to public distribution/sale. Finally, Professor Saltzman draws attention to the areas that biomedical engineers may contribute to, to improve this process.
00:00 - Chapter 1. Introduction to Cancer
03:56 - Chapter 2. Cancer Epidemiology and Biology
16:25 - Chapter 3. Detection of Cancer
23:45 - Chapter 4. Cancer Treatment Options
34:46 - Chapter 5. New Drug Developments in Chemotherapy
38:53 - Chapter 6. Technical and Economic Difficulties of Cancer Drug Research
Complete course materials are available at the Open Yale Courses website: http://open.yale.edu/courses
This course was recorded in Spring 2008. -
25
25. Biomedical Engineers and Artificial Organs
by YaleCourses 12,134 views
Frontiers of Biomedical Engineering (BENG 100)
In this final lecture, Professor Saltzman talks about artificial organs, with a stress on synthetic biomaterials. First, the body's responses (immunological and scar healing responses) to foreign materials are introduced. This leads to discussion of different types of polymer/plastic materials (i.e., Dacron and GORE-TEX) and their properties. Next, Professor Saltzman talks about the design and function of some artificial organs, such as lens implants, heart valves and vessels, hip, dialyzer, heart/lung bypass machine, and the artificial heart. Lastly, challenges and areas for improvement in the field are presented.
00:00 - Chapter 1. Introduction to Biomaterials
03:15 - Chapter 2. Polymers
15:50 - Chapter 3. Threat of Coagulation and Clotting
22:22 - Chapter 4. Physical Responses to Biomaterials
27:41 - Chapter 5. Joint Replacement Using Biomaterials
38:01 - Chapter 6. Dialysis
43:51 - Chapter 7. Artificial Organs and Conclusion
Complete course materials are available at the Open Yale Courses website: http://open.yale.edu/courses
This course was recorded in Spring 2008.