7,132
Subscription preferences
Loading...
Loading...
Working...
Dennis Baldwin
Uploads Play
-
APM 2.6 Airspeed Sensor Installation and Configuration
- 1 day ago
- 526 views
Just wanted to share how to setup an airspeed sensor with APM 2.6. This video shows how install and configure the airspeed sensor on a Phantom FPV Wing. -
Turnigy 9X Heli and Acro Flight Modes Explained
- 6 days ago
- 717 views
I get a lot of questions about setting up flight modes on your Turnigy 9X. Originally I started doing this in HELI mode because I figured that a multirotor is closer to a heli than a plane. But for... -
Duh...The FrSky Taranis DOES Have a Back Button!
- 1 week ago
- 608 views
I feel like such an idiot. I've had this Taranis for 6 months now and just realized there is a "back" button. It just requires a long press of the page button. Definitely not the most intuitive way... -
3D Printed FPV H-Quad Frame Widening Using Rhino 3D and Printed on MakerBot Replicator 2
- 1 week ago
- 941 views
I wanted to share a simple modification that I made to the 3D Printed FPV H-Quad. I'm relatively new to Rhino 3D and wanted to widen the frame width by 10mm. This video shows the process I went thr... -
FrSky Taranis Gimbal/Servo Custom Range Using Curves
- 2 weeks ago
- 970 views
This was a question from RedHotPheasant that I wanted to respond to by doing a video tutorial. It's actually a great question that you can read here:
https://www.youtube.com/watch?v=cuQuWLkDS8w&lc... -
3D Printed FPV H-Quad Hover Time Test in Garage
- 3 weeks ago
- 1,380 views
Getting closer, but I'm still not happy with the flight time. In the video you'll see I get about 5:15 of flight time. I probably could have flown another 30 seconds but I didn't want the ESC LVC t...
Recent activities Play
-
Duh...The FrSky Taranis DOES Have a Back Button!
- by Dennis Baldwin
- 1 week ago
- 608 views
I feel like such an idiot. I've had this Taranis for 6 months now and just realized there is a "back" button. It just requires a long press of the page button. Definitely not the most intuitive way... -
APM 2.6 Airspeed Sensor Installation and Configuration
- by Dennis Baldwin
- 1 day ago
- 526 views
Just wanted to share how to setup an airspeed sensor with APM 2.6. This video shows how install and configure the airspeed sensor on a Phantom FPV Wing. -
FrSky Taranis Elevon/Delta Mixing for Tuffwing 32" Flying Wing
- by Dennis Baldwin
- 4 weeks ago
- 1,199 views
I wanted to share how I setup elevon mixing for my Tuffwing over the weekend. This worked great and I was able to fly with the configuration used in this video. There's probably more than one way t... -
4-in-1 Q Brain ESC Calibration on QuadLugs Frame & HK Pilot Flight Controller
- by Dennis Baldwin
- 1 month ago
- 2,187 views
Getting closer to finishing up this build. I wanted to share the process to do a 4-in-1 calibration with the ESC throttle hub that came with the Q Brain ESC. Danny from QuadLugs.com shipped this to... -
GoPro Hero 2 DIY FPV - 5.8 GHz 200mW Transmitter and RC305 Receiver Frequency Bands
- by Dennis Baldwin
- 9 months ago
- 2,647 views
I've been experimenting with the GoPro 2 bus connector and in a previous video I demonstrated how to use the power mode pin to turn the camera on and toggle through all the camera modes using pins ... -
Turnigy 9x Transmitter & 3 Mode Auxiliary Switch for Different Flight Modes with APM 2.5 Quadcopter
- by Dennis Baldwin
- 1 year ago
- 26,748 views
I purchased my Turnigy 9X from eBay so be sure to check there: http://fave.co/UpCACF
I've received several requests about configuring the Turnigy 9X 3-way auxiliary switch to control different fli...
Playlists by Dennis Baldwin
-
Quadcopters
- 2 years ago